3 pcs Wired White Door Contacts Surface Mount NC Security Alarm Door Window Sensors.These ¾” Door Contact Position switches (DCS) Work with All Access Control and Burglar Alarm Systems

These are the door contact sensors that are in use with any and all commercial or residential card access systems as well as all security burglar alarm system. The door position switches operate with a built an internal magnetic reed switch that closes when the opposing magnet comes within ¾” of the door sensor. Hence when the door opens beyond the ¾” point the door position switch will switch from a closed signal to an open signal. When this happens the access control system or alarm system will sense the change in continuity and will know that the door or window has been opened. When the door or window shuts, the door sensor will notify your security system that the opening has been closed.
3 White ABS Surface Mount Normally Closed Door Contact Switch with 11″ Pigtail
.2 Amp Maximum Switch Current
Will make Sense Door Closer at Roughly ¾” or 15mm
This Contact Works with Any Access Control or Burglar Alarm System Available
NORMALLY CLOSED: When the door or window is open, the contact will give an open signal and when the door is closed the contact will give a closed (circuit) signal.
[amz_corss_sell asin=”B01NCUMSCJ”]