1pc Motion Sensor Light Switch
1pc Product manual Microwave Motion Sensor Light Switch
The ON/OFF detector is an innovative motion sensor light switch with HF system 5.8GHz. It turn lights ON/OFF automatically based on motion and ambient light level.Can control all kinds of lamps ,for example ,halogen ,fluorescent and led lights . As it uses the third generation Merrytek technology ,normal 5.8GHz microwave module can easily reach high mounting high up to 12m and wide detection area 16m in diameter . Features:
1. Automatic switching based on motion and ambient light level.
2.Detection area, time delay and daylight threshold can be precisely set via DIP switch.
3. Support higher mounting height 12m Max. Wide detection area ,range up to 16m in diameter.
4. Zero-crossing point operation helps protect the sensor against in-rush current.
5. Built-in daylight sensor can read brightness value, the sensor does not switch on the light if with sufficient natural light.
Operating Voltage: 120-277Vac, 50Hz/60Hz
Max. Load: 200W@120Vac, 400W@277Vac-Ballast; 400W@120Vac, 800W@277Vac-Resistive
HF System: 5.8GHz+/-75MHz, ISM wave band
Power Consumption: less than 0.5W(standby), less than 1W(operation)
Transmitting Power: less than 0.5mW
Detection Zone Max.(D x H): 16m x 12m
Motion Detection: 0.5~3m/s
Hold Time: 5s/30s/90s/3min/20min/30min
Detection Sensitivity: 25% / 50% / 75% / 100%
Daylight Sensor: 5lux / 10lux / 30lux / 50lux / 100lux / 150lux / Disable
Detection Angle: 150(wall installation) 360(ceiling installation)
Operation Temperature: -20C~60C
IP Rating: IP20
Life Time: 50,000 hours
MOTION SENSOR SWITCH turn lights ON/OFF automatically based on motion and light level.
ALLOW TO ADJUST THE SENSITIVITY. Detection area can be adjusted by selecting the combination on the DIP switches for different applications.
DAYLIGHT SENSOR , Different daylight threshold can be preset on DIP switches. The light keeps off during daytime even when movement is detected (Ambient lux level is above preset daylight threshold),But the light will always turn on upon movement if daylight sensor is disabled.
MOTION LIGHT SWITCH, With movement and insufficient ambient lux level, the light is triggered on by the detector, if there is no more movement , the light turns off automatically after hold-time preset.
MICROWAVE MOTION SENSOR, Its sensitivity is higher than infrared motion sensor. Activated by motion and speed, always functioning regardless of the background temp. Dust-proof and smoke-proof. Wide detection area ,range up to 16m in diameter. It can be detected trough plastic, glass and thin non-metal materials. Long life span, 50,000 hours.